Connecting the Product to a PC as a USB HUB Tidying Up the Connected Cables Remote Control and Peripherals Connecting the Samsung Smart Remote to the product About the Samsung Smart Remote Connecting the Ark Dial to the product About the Ark Dial...
Before Using the Product Safety Precautions Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Caution Do not disconnect the power cord while the product is being used. ● Only use the power cord provided with your product by Samsung. Do not use the power cord with other ● products. Keep the power socket where the power cord is connected unobstructed.
Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place. –...
Page 6
Be sure to power off the product and disconnect the power cord when water or other foreign substances – have entered the product. Then contact Samsung Customer Service Centre. Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. " Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product (Service fee will be charged.) Do not press the product screen with hands or other objects.
Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. ● The optimal viewing distance is over 80 cm. ● Keep your eyes directly in front of the screen. ● Adjust the angle so light does not reflect on the screen. ●...
Preparations Installation Attaching the Stand " Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. " Disassembly is the reverse order of assembly. Push the stand neck into Turn the stand neck 90 Tightly fasten the Turn the stand neck 180...
Precautions for moving the product Move the product by holding the stand bottom Do not directly apply pressure on the screen. ● ● with one hand and the stand neck with the other. Do not hold the screen when moving the product. ●...
Checking the space around the product Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product.
Page 12
Caution Grasp the left and right sides of the monitor and adjust the swivel. ● Grasp the centre of the monitor and adjust the height. ● Do NOT hold the stand moving part with your hand when leveling the screen. Your hand may get hurt. ●...
Rotating the Product " The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -90˚(±2.0˚) ~ 90˚(±2.0˚) You can rotate your product as shown below. - 13 -...
Page 14
Be sure to fully extend the stand before rotating the product. ● If the stand is not fully extended, the product may not be rotated due to the lock. If you rotate the product by ● force, the lock may become damaged. When rotating the product, be careful not to damage the product by hitting the object or stand.
Attaching the BRACKET WALL " The bracket may not be supplied, depending on the country and region. " Power the product off and remove the power cable from the power socket. Attach the BRACKET WALL here BRACKET WALL Align with on the monitor, and tightly fasten the screws on Bracket Wall Sub Remove the screws attached on...
Page 16
Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit ●...
Control Panel " You can turn on the product with the Power button at the rear of the product, and then use the Control menu. The Control menu appears when the Power button is pressed while the product is On. <Rear>...
Page 18
The colour and shape of parts may differ from what is shown. ● When using the buttons (excluding Power) on the Samsung Smart Remote, the receiver LED does not blink. ● - 18 -...
Connections Using various connectors, you can also connect external devices. Ports " The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. ONE CONNECT Port Description...
Connecting the product to the One Connect " The product turns off when the One Invisible Connection cable is disconnected, and turns on when it is connected. Port Description Connects to a USB device. " The USB ports on the product accept a maximum constant current of 0.5A. If the maximum value is exceeded, USB ports may not work.
Page 21
Connects to a PC, using a USB cable. This port is compatible with USB 2.0 cables. " For more information about the USB Upstream, refer to “Connecting the Product to a PC as a USB HUB”. Dedicated to service technicians. Connects to a audio device using the optical(digital) cable.
Connecting the Product to a PC as a USB HUB Using the product as a hub, connect and use various source devices with the product at a time. " To detect and start a USB device faster, connect the USB device to the port on the product.
Tidying Up the Connected Cables Raise the stand neck to its full height, and then rotate the Attach the cable guides to the groove on the back of monitor clockwise to switch it to landscape mode. the monitor. Connect the cables to the corresponding ports. Insert the cable holder into the hole to fix the cables.
When you turn on the product for the first time, the Samsung Smart Remote pairs to the product automatically. If the Samsung Smart Remote does not pair to the product automatically, point it at the front of the product, and then press and hold the buttons simultaneously for 3 seconds or more.
About the Samsung Smart Remote Learn about the buttons on the Samsung Smart Remote. MIC / LED <Rear> Solar Cell - 25 -...
Page 26
Button Description Expose to light when the remote is not in use. This will extend the remote's operating Solar Cell time. Press to turn the Product on or off. (Power) Used as MIC when using voice recognition with the remote control. The LED on the front will light when charging.
Page 27
The functions related to the broadcast and channel are available only in some apps or external devices. " Use the Samsung Smart Remote less than 6 m from the product. The usable distance may vary with the wireless environmental conditions.
Connecting the Ark Dial to the product Connect the Ark Dial to your product to operate the product. When you turn on the product for the first time, the Ark Dial pairs to the product automatically. If a connection is not established automatically, direct the Ark Dial at the front of the Product and press (Return) and (Ark Dial...
About the Ark Dial Learn about the buttons on the Ark Dial Use the Ark Dial to freely change the screen settings or switch the mode, without having to hold the remote control. Use the Ark Dial to access the Ark Dial Menu.
Page 30
Use the Ark Dial less than 6 m from the product. The usable distance may vary with the wireless environmental conditions. " The Universal Remote function operates normally only when you use the Samsung Smart Remote or Ark Dial that comes with the product.
Page 31
About the Ark Dial Menu Home Ark Dial Guide From the Ark Dial Menu, press the Down key on the Ark Dial to access the Ark Dial Guide. Use the Ark Dial Guide find out about the useful features of the Ark Dial. Items Description Quick Settings...
Precautions and Notes You can get instructions and information that you must read after installation. Read After Installing the product Read this information after installing the product. Picture sizes and input signals Picture Size is applied to the current source. The applied Picture Size will remain in effect whenever you select that source unless you change them.
Read Before Connecting a Computer (Supported Resolutions) Check the resolutions supported for PC input signals. When you connect your product to a computer, set the computer's video card to one of the standard resolutions listed in the tables below or on the next pages. The product will automatically adjust to the resolution you choose. Note that the optimal and recommended resolutions are 3840 x 2160 at 165 Hz.
VESA CVT Horizontal Resolution Vertical frequency Clock frequency Polarity frequency HDMI IN (Dots x lines) (Hz) (MHz) (horizontal / vertical) (KHz) 2560 x 1440 88.787 59.951 241.500 1920 x 1080 192.788 164.917 401.000 2560 x 1440 182.996 119.998 497.750 2560 x 1440 257.169 164.958 699.500...
Supported Resolutions for Video Signals Check the resolutions supported for video signals. CTA-861 Horizontal Resolution Vertical frequency Clock frequency Polarity frequency HDMI IN (Dots x lines) (Hz) (MHz) (horizontal / vertical) (KHz) 720 x 480 31.469 59.940 27.000 1280 x 720 45.000 60.000 74.250...
List of graphic cards supporting QUANTUM HDR 2000 QUANTUM HDR 2000 is accessible only on Windows 10 systems equipped with graphic cards that support Play Ready 3.0 Digital Rights Management (for protected HDR content). Use graphic cards listed below for QUANTUM HDR 2000.
Specifications General Model Name S55BG97* Size 138.7 cm Display area 1209.6 mm (H) x 680.4 mm (V) Pixel Pitch 0.315 mm (H) x 0.315 mm (V) Maximum Pixel Frequency 74.267985 MHz Horizontal 115.488 ~ 397.155 Khz Frequency Synchronization (PANEL Spec) Vertical 48 ~ 165 Hz Frequency...
Page 38
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. The specifications are subject to change without notice to improve quality. ● For detailed device specifications, visit the Samsung website. ● - 38 -...
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician is requested to give instructions on how to use product or simply adjusts options without ●...
External impact or drop. ● Use of supplies or separately sold product unspecified by Samsung. ● Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics ● Co., Ltd. Remodeling or repairing the product by customer.
The sound quality of the monitor may be degraded. ● " If you encounter any issues when using the function, contact the Samsung Service Centre. " If you change the screen resolution while the function is On, the screen may intermittently blank out due to the graphic card.
The models in the Graphics Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. "...