Fiat 500X 2018 Owner's Manual page 48

46 GETTING TO KNOW YOUR VEHICLE
Seatback Release Lever
Cargo Area Enlargement
Folding both sides of the rear seat provides additional
storage in the rear cargo area.
Proceed as follows:
1. Remove the rear shelf (if equipped).
2. Fully lower the rear seat head restraints.
3. Move the safety belts to the outboard side of the seat.
4. Pull the seatback release lever to fold both sides of the
rear seatbacks completely forward.
Seatback Repositioning
NOTE: If interference from the cargo area prevents the
seatback from fully locking, you will have difficulty return-
ing the seat to its proper position.
1. Move the safety belts to the seat belt guides on the top
edge of the seat to ensure the seatbacks properly latch.
2. Lift the seatbacks, pushing them back until they lock on
both the latches. Verify the red notches are no longer
visible on the release lever. If the red notches are visible,
the seatback is not secure.
Rear Seat Latch