Fiat 500X 2018 Owner's Manual page 340

338 SERVICING AND MAINTENANCE
The Service Position command can be repeated several
times to bring the blades into the desired position, up to a
maximum of three times.
After three subsequent activations the strategy is disabled.
Function Deactivation:
The functionality is reset if:
• The ignition is turned to the RUN mode.
• Number of subsequent activations is three.
• Two minutes timer has expired after cycling the ignition
OFF.
NOTE: When turning the ignition ON, the blades will go
into the parking position.
Front Wiper Blade Removal/Installation
1. Lift the front wiper arm upward to raise the wiper blade
off of the windshield.
2. Push the release button on the arm of the wiper blade.
3. Push the wiper blade up and remove it.
1 — Wiper Blade
2 — Release Button
3 — Wiper Arm
4. Install the wiper blade and firmly push the wiper blade
until it snaps into place.
Rear Wiper Blade Removal/Installation
1. Carefully lift the rear wiper arm upward to raise the
wiper blade off of the liftgate glass.