Replacing The I/O Board; Procedure; Post-Requisites - Dell XPS 13-9360 Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the I/O board under the fan and align the screw holes on the I/O
board with the screw holes on the palm-rest assembly.
2 Align the screw hole on the display cable with the screw hole on the I/O
board.
3 Replace the screws that secure the I/O board to the palm-rest assembly.
4 Slide the I/O-board cable into the I/O board and close the latch to secure
the cable.
5 Slide the fingerprint-reader cable (optional) into the I/O board and close
the latch to secure the cable.
6 Connect the media-card reader cable to the I/O board.
7 Adhere the tape that secures the display cable to the I/O board.

Post-requisites

1 Replace the battery.
2 Replace the base
computer. After working inside your
cover.
After working inside your
51