Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for ML Accessories POTHB1
Summary of Contents for ML Accessories POTHB1
- Page 1 INSTALLATION & MAINTENANCE MANUAL POTHB1 / POTHB2...
-
Page 2: General Instructions
These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: POTHB1 / POTHB2 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. -
Page 3: Bracket Mounting
To suspend the fitting, screw the mounting hoop into the top of the luminair • using suitable fixing accessories. Screw down mounting hoop Fig. 1 Fig. 1 Bracket mounting Bracket mounting • Using the POTHB1BRAC or POTHB2BRAC mounting bracket as a template (sold separately), mark the Using the PROHB1BRAC or PROHB2BRAC mounting bracket as a templ •... - Page 4 Fig. 2 Fig. 2 • Align the luminaire with the holes on the sides of the bracket then adjust to the desired angle using the Align the luminaire with the holes on the sides of the bracket then adjust to th •...
- Page 5 POTHBDALI DALI control module • The luminaire can be connected to a 0-10V dimmer or controlled via DALI (POTHBDALI is required, control gear and software not supplied) • Connect the luminaire to the DALI module ensuring the correct polarity is observed: GND (pink), +12V (black and white), 0-10V (purple) (see Fig.
- Page 6 POTHBRC Remote control • Insert 2 x AAA batteries (not included) • Adjust sensor settings as required (see table below) Settings indicators show which functions have been selected Settings indicator light area shows which functions have been Function settings Function settings ON/OFF Press ON/OFF button until Brightness indicator light is on ON/OFF...
-
Page 7: Warranty
If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation WARRANTY costs associated with the replacement product. - Page 8 The products comply with all essential requirements of the directives. Scott Brewer Catherine Connolly Head of Technical ML Accessories Ltd. Unit E Chiltern Park, Boscombe Road, Dunstable. Bedfordshire, LU5 4LT This declaration becomes invalid if technical or operational modifications are introduced without ML Accessories Ltd. written consent.
- Page 9 The product complies with all essential requirements of the directives. Scott Brewer Catherine Connolly Technical Manager ML Accessories Ltd. Unit E Chiltern Park, Boscombe Road, Dunstable. Bedfordshire, LU5 4LT This declaration becomes invalid if technical or operational modifications are introduced without ML Accessories Ltd. written consent.
- Page 10 SUPPLIED BY: (UK) MANUFACTURER ML ACCESSORIES LTD, UNIT E CHILTERN PARK, BOSCOMBE ROAD, DUNSTABLE LU5 4LT, WWW.MLACCESSORIES.CO.UK (EU) AUTHORISED REPRESENTATIVE SLV LIGHTING GROUP, DAIMLERSTRASSE 21-23, 52531 ÜBACH-PALENBERG, GERMANY EMAIL: EPREL@GROUP.SLV.COM MADE IN CHINA -40~ 230V >80 IP65 50°C 50Hz AKFEB23_V1...
Need help?
Do you have a question about the POTHB1 and is the answer not in the manual?
Questions and answers