Gold's Gym TRAINER 520 User Manual page 13

11. Insert the wires into the Right Handrail (64)
through the indicated hole as you set the con-
sole assembly on the Left and Right Uprights
(66, 76). Make sure that no wires are pinched.
Attach the console assembly with ten #8 x 3/4"
Screws (4); start all ten Screws, and then
tighten them. Do not overtighten the Screws.
See step 5. Firmly tighten the six 3/8" x 3 1/4"
Screws (2).
12. Attach the Latch Pin Assembly (67) to the Left
Upright (66) with two #10 x 3/4" Screws (8) ; start
both Screws, and then tighten them.
13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the fl oor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see page 22).
11
Wires
Hole
4
64
4
76
12
67
8
13
Console Assembly
Wires
4
4
66
66
4