Toyota RAV4 HYBRID 2017 Manual page 460

460
6-4. Using the other interior features
3
Press and hold the desired
HomeLink
vehicle) for 2 seconds and
release
sequence
release) up to 3 times to
complete programming.
If the garage door opener motor
operates when the HomeLink
button is pressed, the garage
door opener motor recognizes
the HomeLink
■
Enabling 2-way communication with a garage door (only avail-
able for compatible devices)
When enabled, 2-way communication allows you to check the sta-
tus of the opening and closing of a garage door through indicators
in your vehicle.
2-way communication is only available if the garage door opener
motor used is a compatible device. (To check device compatibility,
refer to www.HomeLink.com.)
1
Within 5 seconds after programming the garage door opener has
been completed, if the garage door opener motor is trained to
HomeLink
idly (green) and the light on the garage door opener motor will
blink twice, indicating that 2-way communication is enabled.
If the indicators do not flash, perform
presses of the HomeLink
completed.
2
Press a programmed HomeLink
door.
3
Within 1 minute of pressing the HomeLink
garage door operation has stopped, press the "Learn" or "Smart"
button on the garage door opener motor. Within 5 seconds of the
establishment of 2-way communication with the garage door
opener, both garage door operation indicators in the vehicle will
flash rapidly (green) and the light on the garage door opener
motor will blink twice, indicating that 2-way communication is
enabled.
RAV4-HV_OM_OM42B03U_(U)
®
button (inside the
it. Repeat this
(press/hold/
®
®
signal.
®
, both garage door operation indicators will flash rap-
®
button after programming has been
2 3
and within the first 10
®
button to operate a garage
®
button, after the