Toyota RAV4 HYBRID 2017 Manual page 219

■
Camera sensor detection information
●
The high beam may not be automatically turned off in the following situa-
tions:
• When oncoming vehicles suddenly appear from a curve
• When the vehicle is cut in front of by another vehicle
• When vehicles ahead are hidden from sight due to repeated curves, road
dividers or roadside trees
• When vehicles ahead appear from the faraway lane on wide road
• When vehicles ahead have no lights
●
The high beam may be turned off if vehicles ahead that is using fog lights
without using the headlights is detected.
●
House lights, street lights, traffic signals, and illuminated billboards or signs
may cause the high beam to switch to the low beams, or the low beams to
remain on.
●
The following factors may affect the amount of time taken to turn the high
beam on or off:
• The brightness of headlights, fog lights, and tail lights of vehicles ahead
• The movement and direction of vehicles ahead
• When a vehicle ahead only has operational lights on one side
• When a vehicle ahead is a two-wheeled vehicle
• The condition of the road (gradient, curve, condition of the road surface
etc.)
• The number of passengers and amount of luggage
●
The high beam may be turned on or off when the driver does not expect it.
●
Bicycles or similar objects may not be detected.
RAV4-HV_OM_OM42B03U_(U)
4-3. Operating the lights and wipers
219
4