■
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless
remote control.
1
Turn the power switch off.
2
When the indicator light on the key surface is not on, press and hold
or
.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Unlocking function
Holding the driver's door handle
unlocks only the driver's door.
Holding a passenger's door handle
unlocks all the doors.
Holding a door handle unlocks all
the doors.
■
Impact detection door lock release system
In the event that the vehicle is subject to a strong impact, all the doors are
unlocked. Depending on the force of the impact or the type of accident, how-
ever, the system may not operate.
■
When all the doors are locked with entry function or wireless remote
control
●
The doors cannot be unlocked with the door lock switch.
●
The door lock switch can be reset by unlocking all the doors with the entry
function or wireless remote control.
■
Conditions affecting operation
→P. 138
■
Customization
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: →P. 636)
RAV4-HV_OM_OM42B03U_(U)
3-2. Opening, closing and locking the doors
for approximately 5 seconds while pressing and holding
2
.)
Exterior: Beeps 3 times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
117
Beep
,
3