Notification Led; Voice Command; Touch Screen - HTC TyTN User Manual

No. Item
1 Hardware Keyboard
2 Messaging Button
3

Notification LED 1

4 Notification LED 2
5 INTERNET EXPLORER
Button
6 Second Camera
7 Jog Wheel
8 OK Button
9

VOICE COMMAND

10 Micro SD Card Slot
11

Touch Screen

12 VIDEO CALL Button
13 Left SOFT KEY
14 Right SOFT KEY
Function
See Chapter 2 for details.
Press to quick start your Messaging.
This LED shows a blinking Blue light for Bluetooth
system notification of powered-up and ready to
transmit radio frequency signal, and a blinking Green
light for Wi-Fi status. When both Bluetooth and Wi-Fi
are enabled, their lights blink alternately.
This bi-color LED shows Green and Amber lights
for UMTS/GSM standby, UMTS/GSM message,
UMTS/GSM network status, notification, and battery
charging status.
Press to launch Internet Explorer.
Use this video camera for video call conversations.
When in the Today screen or using applications,
scroll up or down to navigate through menus,
program instructions; press the wheel to carry out
selection. During a call or playing music, scroll up or
down to adjust the sound volume. When receiving
an incoming call, scroll down to silence the audio
notification.
Press to confirm your data entries, or to exit the
program in use.
Press to start Voice Speed Dial; press and hold to
record a voice note.
In this card slot, insert a Micro SD memory card for
storing data, or insert a Micro SD input/output card
such as a network card.
Tap the screen with the stylus to write, draw, or make
a selection.
After entering a phone number in the Phone
program, press this button to start a video call.
Press to execute the command shown in the label
above the button.
Press to execute the command shown in the label
above the button.
Getting Started 13