ID number input failure
After the last ID number is inputted, the
ignition switch ring and Honda SMART Key
indicator will flash every second until the EM
mode coupler is removed, and the ignition
switch cannot be unlocked.
Pull out the EM mode coupler and reconnect
it to the EM mode connector. Follow the
procedure again.
P. 138
2
Unlock the Ignition Switch in an Emergency
ID number input cancel
Pull out the EM mode coupler from the EM
mode connector.
Also, if you make a mistake while inputting
the ID number, remove the EM mode
coupler from the EM mode connector,
connect it to the EM mode connector again,
and then re-input the ID number from the
beginning.
Store the removed EM mode coupler in
●
the tool kit at all times.
141