Honda ADV750 Owner's Manual page 106

Engine Oil Changing Engine Oil & Filter
u
Rubber seal
Remove the oil filter with a filter wrench
7.
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
Discard the oil and oil filter at an
u
approved recycling centre.
Apply a thin coat of engine oil to the
8.
rubber seal of a new oil filter.
Install the new oil filter and tighten.
9.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft)
102
Oil filter
Install a new sealing washer onto the
10.
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Fill the crankcase with the recommended
11.
oil ( P. 84, P. 169) and install the oil fill
2 2
cap/dipstick.
Required oil
When changing oil & engine oil
filter:
3.4 L (3.6 US qt, 3.0 Imp qt)
When changing oil only:
3.2 L (3.4 US qt, 2.8 Imp qt)
Check the oil level.
12.
Check that there are no oil leaks.
13.
Install the parts in the reverse order of
14.
removal.
P. 99
2