D-Link Vigilance DCS-4714E User Manual page 41

Section 3: Configuration
ICR & IR
Use this section to configure the IR LED and IR-cut removable filter behavior
for your camera.
D/N Setting Day Mode enables the IR Cut Filter and turns off the IR LEDs. Night Mode
disables the IR Cut Filter and turns on the IR LEDs. Select Auto to set the
day/night mode automatically according to the amount of light in the
environment, or Timing to set it according to a schedule.
Delay/ If Auto is selected, configure how long the camera should wait after a change
Sensitivity
in lighting conditions to adjust the day/night mode, and how sensitive it
should be to changes in the environment.
IR LED
Toggle this to enable or disable the IR LED.
IR LED Mode Select Manual to set the IR LED level or Auto to have the camera adjust it
automatically.
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual 41