Changing The Selections After Programme Has Started; Cancelling The Programme - Beko CM 10142 B User Manual

6.12 Changing the Selections After
Programme has Started
Adding laundry after the programme has
started :
If the water level in the machine is suitable
when you press Start/Pause button, the
door lock will be deactivated and the door
will open, allowing you to add garments. The
door lock icon on the display goes off when
the door lock is deactivated. After adding
garments, close the door and press Start/
Pause button once again to resume the
washing cycle.
If the water level in the machine is not suit-
able when you press Start/Pause button, the
door lock cannot be deactivated and the
door lock icon on the display remains on.
If the temperature of the water inside
the machine is above 50°C, you
cannot deactivate the door lock for
safety reasons, even if the water
level is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the
machine to pause mode. Pause symbol will
flash on the display.
Changing the programme selection after
programme has started:
Programme cannot be changed when a pro-
gramme is running. You need to pause the
operating programme if the Child Lock is not
active and select a new programme. This
action will cancel the current programme.
The selected programme starts
anew.
Changing the auxiliary function, speed
and temperature:
Depending on the step the programme has
reached, you can cancel or activate the aux-
iliary functions. See "Auxiliary Function Se-
lection"
You can also change the speed and temper-
ature settings. See "Spin Speed Selection"
and "Temperature Selection".
It gives out an audio warning if
change is not allowed.
The loading door will not open if the
water temperature in the machine is
high or the water level is above the
loading door baseline.

6.13 Cancelling the Programme

When the machine is turn on and off the pro-
gramme gets cancelled. Press and hold On/
Off button for 3 seconds.
If you turn the programme selection
button when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading door
after you have cancelled the pro-
gramme but it is not possible to
open the loading door since the wa-
ter level in the machine is above the
loading door baseline, then turn the
Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.
EN / 34