End Time - Beko CM 10142 B User Manual

If your product's wireless network
function is disabled, it will be en-
abled when you push on the support
service button. Wireless connection
will stay enabled unless you turn it
off after support service is com-
pleted.

6.9 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts is
shown in hours such as 1h, 2h, and the re-
maining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
Programme duration may differ from
the values in section "Programme
and consumption table" depending
on the water pressure, water hard-
ness and temperature, ambient tem-
perature, amount and the type of
laundry, auxiliary functions selected
and the changes at the mains
voltage.
After a certain period of time after
the end time function is activated,
the machine goes into standby
mode and some LEDs on the screen
turn off. If there is any user input, the
LEDs will turn on again.
With the End Time function, the start-up of
the programme may be delayed up to 24
hours. After pressing End Time Setting but-
ton, the programme's estimated ending time
is displayed. If the End Time is set, End Time
Setting indicator is illuminated.
In order for the End Time function to be ac-
tivated and the programme to be completed
at the end of the specified time, you must
press Start/Pause button after adjusting the
time.
If you want to cancel the End Time function,
turn off and on the product by pressing the
On/Off button.
When you have activated the End
Time function, do not add liquid de-
tergent in the powder detergent
compartment no 2. There is the risk
of staining of the clothes
a. Open the loading door, place the laundry
and put detergent, etc.
b. Select the washing programme, temper-
ature, spin speed and, if required, the
auxiliary functions.
c. Set the end time of your choice by press-
ing the End Time Setting button. End
Time Setting indicator illuminates.
d. Press Start / Pause. Time countdown
starts.
Additional laundry can be added into
the machine during the End Time
countdown. At the end of the count-
down, End Time indicator turns off,
washing cycle starts and the time of
the selected programme appears on
the display.
EN / 32