Auxiliary Function Selection - Beko CM 10142 B User Manual

Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the Spin Speed
indicator. It is possible that the recommen-
ded spin speed value is not the maximum
spin speed that can be selected for the cur-
rent programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed de-
creases gradually.
Then, depending on the model of the
product, "Rinse Hold l_l " and "No Spin _"
options appear on the display.
If you are not going to unload your laundry
immediately after the programme completes,
you can use Rinse Hold function in order to
prevent them from getting wrinkled when
there is no water in the machine.
This function holds the laundry in the final
rinsing water. If you want to spin your laun-
dry after the Rinse Hold function:
a. Adjust the Spin Speed.
b. Press Start / Pause. The programme will
resume. Machine drains the water and
spins the laundry.
If you want to drain the water at the end of
the programme without spinning, use No
Spin function.
No change can be made in pro-
grammes where spin speed adjust-
ment is not allowed.
You can change the spin speed after the
washing starts if the washing steps allow it.
Changes cannot be made if the steps do not
allow it.
Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes,
you can use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the machine. Press
Start/Pause button after this process if you
want to drain the water without spinning
your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start/
Pause button. The programme will resume.
Water is drained, laundry is spun and the
programme is completed.

6.8 Auxiliary Function Selection

Select the desired auxiliary functions before
starting the programme. Whenever a pro-
gramme is selected, icons of the auxiliary
function symbol that is selected together
with it illuminates.
Also the frames of the auxiliary functions se-
lected for the current programme after the
washing has started remain illuminated.
EN / 28