Steps
1. Align the tabs on the hard-drive bracket with the slots on the hard drive.
2. Flex the hard-drive bracket and replace the remaining tabs on the hard-drive bracket with the slots on the hard drive.
3. Place the hard-drive assembly into the slot and slide it to lock the hard-drive assembly on the display-assembly base.
Next steps
1. Install the
back
cover.
2. Install the
cable cover
3. Install the stand.
4. Follow the procedure in
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
cable cover
4. Remove the
back
cover.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the removal
procedure.
(optional).
After working inside your
Before working inside your
(optional).
computer.
computer.
Removing and installing components
25