Removing The M.2 2280 Solid-State Drive-Slot 1 - Dell OptiPlex 5400 Service Manual

Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x2.5) to secure the solid-state drive to the system board.
Next steps
1. Install the system-board
2. Install the back cover.
3. Install the cable cover
4. Install the stand.
5. Follow the procedure in

Removing the M.2 2280 solid-state drive-slot 1

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the cable cover
4. Remove the back cover.
5. Remove the system-board
About this task
The following image indicates the location of the slot-1 M.2 2280 solid-state drive and provides a visual representation of the
removal procedure.
shield.
(optional).
After working inside your
Before working inside your
(optional).
shield.
computer.
computer.
Removing and installing components 31