Sony STR-AZ7000ES Startup Manual page 328

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Selecting the method to use the HDMI OUT B (ZONE 2) jack (HDMI OUT B Mode)
You can use the HDMI OUT B (ZONE 2) jack can be used for the Zone 2 output.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [HDMI OUT B Mode].
2
3 Select the setting you want.
Main: Uses the jack for the main zone output. Recommended when you enjoy TV or projector content in only one room (main zone).
Zone2: Uses the jack for the Zone 2 output. Recommended when you enjoy video and sound from a device connected to the receiver in a zone other than the main zone
(Zone 2).
Note
When [Zone2] is selected, the [Control for HDMI], [Standby Linked to TV] and [Fast View] functions do not work.
When [Main] is selected, HDMI IN audio signals cannot be output to Zone 2 speakers and the PRE OUT jacks unless the input for Zone 2 is [SOURCE] or the same input is selected in the main zone
and Zone 2.
When [HDMI OUT B Mode] in [HDMI Settings] is set to [Zone2], the video signals that can be played are limited depending on the input as follows:
HDMI IN 1, 2, 3 and 4 jacks:
up to 4K/60p 4:4:4
HDMI IN 5, 6 jacks and HDMI IN 7 jack (STR-AZ7000ES/STR-AZ5000ES only):
up to 4K/60p 4:2:0
5-037-021-11(1) Copyright 2022 Sony Corporation
239