Sony STR-AZ7000ES Startup Manual page 313

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Setting the height speaker terminals assignment (Height1 Speaker Assign/Height2 Speaker Assign/Height3 Speaker Assign)
You can set the assignment for the following height speaker terminals.
SPEAKERS HEIGHT 1 (ZONE 2) terminals (for STR-AZ3000ES)
SPEAKERS HEIGHT 2 (ZONE 2/CENTER 2 (R ONLY)) terminals (for STR-AZ5000ES)
SPEAKERS HEIGHT 3 (FRONT WIDE/ZONE 2/CENTER 2 (R ONLY)) terminals (for STR-AZ7000ES)
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Manual Speaker Settings].
2
Select [Height1 Speaker Assign] (*1), [Height2 Speaker Assign] (*2), or[Height3 Speaker Assign] (*3).
3
*1 for STR-AZ3000ES
*2 for STR-AZ5000ES
*3
for STR-AZ7000ES
Select either of the following settings.
4
Height1 Speaker Assign (for STR-AZ3000ES)
Zone2: When using Zone 2 connection.
Off: When none of the connections above are used.
Height2 Speaker Assign (for STR-AZ5000ES)/Height3 Speaker Assign (for STR-AZ7000ES)
Zone2: When using Zone 2 connection.
Center 2: When using center 2 speaker connection.
Off: When none of the connections above are used.
Note
You can only set the assignment for the SPEAKER HEIGHT 1 (ZONE 2)/SPEAKER HEIGHT 2 (ZONE 2/CENTER 2 (R ONLY))/SPEAKER HEIGHT 3 (FRONT WIDE/ZONE 2/CENTER 2 (R ONLY))
terminals if the speaker pattern is set to 2.0, 2.1, 3.0, 3.1, 4.0, 4.1, 5.0, 5.1, 5.0 (SB), 5.1 (SB), 6.0, 6.1, 6.0 (SB), 6.1 (SB), 7.0 or 7.1.
5-037-021-11(1) Copyright 2022 Sony Corporation
224