Sony STR-AZ7000ES Startup Manual page 325

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Setting the HDMI audio signal output of connected devices (Audio Out)
You can set the HDMI audio signal output of playback devices connected to the receiver via an HDMI connection.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Audio Out].
2
3 Select the setting you want.
AMP: HDMI audio signals from playback devices are only output to the speakers connected to the receiver. Multi-channel sound can be played back as it is.
TV + AMP : The sound is output from the speaker of the TV and the speakers connected to the receiver.
Note
Audio signals are not output from the speaker of the TV when [Audio Out] is set to [AMP].
When [TV + AMP] is selected, the sound quality of the playback device depends on the sound quality of the TV, such as the number of channels and the sampling frequency, etc. If the TV has stereo
speakers, the sound output from the receiver is in the same stereo as the TV, even when playing back multi-channel source.
When you connect the receiver to a video device (projector, etc.), sound may not be output from the receiver. In this case, select [AMP].
5-037-021-11(1) Copyright 2022 Sony Corporation
236