Electrical Configurations - OCEANAIRE 2OACH Series Engineering, Installation And Service Manual

ELECTRICAL CONFIGURATION
SERVICE CORD
All 2OACH-Series units are equipped with a standard 10-foot long service cord
with plug configurations and receptacle requirements as shown in this chart.
2OACH1211, 2OACH1811, 2OACH2412 and 2OACH3612 units come with LCDI
(Leakage Current Detection & Interruption) devices that serve as a means of
electrical protection.
DO NOT USE THE LCDI AS AN ON/OFF SWITCH FOR THE UNIT
All 3-phase models are equipped with locking plugs for added connection
reliability. Refer to the chart below for plug and receptacle details for all 2OACH
models.
A DAMAGED POWER SUPPLY CORD MUST BE
REPLACED WITH A NEW POWER SUPPLY CORD
UNIT/MODEL
115 VOLT
2OACH1211
115 VOLT
2OACH1811
208-230 VOLT SINGLE PHASE
2OACH2412
208-230 VOLT SINGLE PHASE
2OACH3612
208-230 VOLT SINGLE PHASE
2OACH6012
208-230 VOLT 3-PHASE
2OACH3632
2OACH6032
460 VOLT 3-PHASE
2OACH3634
2OACH6034
CAUTION
AND NOT REPAIRED
PLUG CONFIGURATION
6
15A-125 VOLT
NEMA 5-15P
20A-125 VOLT
NEMA 5-20P
20A-250 VOLT
NEMA 6-20P
30A-250 VOLT
NEMA 6-30P
50A-250 VOLT
NEMA 6-50P
30A-250 VOLT
NEMA L15-30P
20A-460 VOLT
NEMA L16-20P
RECEPTACLE
NEMA 5-15R
NEMA 5-20R
NEMA 6-20R
NEMA 6-30R
NEMA 6-50R
NEMA L15-30R
NEMA L16-20R