General Information - OCEANAIRE 2OACH Series Engineering, Installation And Service Manual

Portable air-cooled heat pump

Hide thumbs

Table Of Contents

Table of Contents

The OceanAire 2OACH is a portable air-cooled heat pump designed for permanent or

temporary spot cooling or heating applications. The entire unit has been built in a

premium sheet metal cabinet, equipped with heavy-duty casters for mobility. All

2OACH models come standard with a 10-foot power cord for electrical connection and

added mobility in service. These units direct heated/cooled air to specific areas or

objects through a discharge grille located on the upper-front of the unit, while rejecting

cooled/heated air from the top of the unit. The 2OACH models range in capacities from

12,000 BTU/HR to 60,000 BTU/HR to satisfy most space cooling or heating requirements.

The 2OACH is a self-contained unit with the entire system (evaporator and condenser

blower assemblies, electrical and refrigeration components), neatly arranged in a gray

and blue polyester powder coated metal cabinet. When connected to the proper source

of electrical power, the 2OACH is controlled by a solid-state electronic controller, with

numerous options of temperature and airflow controls that will provide the desired level

of comfort when cooling or heating.

A wide variety of accessories and factory installed options are available for the 2OACH

units allowing for improved performance and added versatility.

2nd GENERATION

DELUXE PORTABLE

PORTABLE

AIR COOLED

HEAT PUMP

ALL OCEANAIRE PRODUCTS ARE COVERED BY THE OCEANAIRE LIMITED WARRANTY

PLUS, 4 ADDITIONAL YEARS FOR THE COMPRESSOR

It is important that the warranty card be filled out completely and returned to the

factory within fourteen (14) days of installation of the unit in order to receive the

benefits of the warranty.