Safety Equipment - Tecnosystemi smart clima 11100220 User Manual

HOW TO USE THE TELESCOPIC POLE LIFT
The central tube must always be placed firmly on the ground (the guarantee does not occur in the case of damaged
support)
Check the power supply before connecting the device to a power outlet.
Make sure that the fixing screw of the platform is properly tightened.
Make sure that the locking knob is securely screwed to the tripod.
Make sure that the cable is secured in the pulley before starting to raise the load.
Check the operativity of the joystick controls both uphill and downhill before lifting the load.
Avoid hitting the platform during operation.
Do not forget to pull the emergency handle before the descent of the load.
Protect the hoister from moisture and dust performing periodic maintenance.
Do not pull on the wires and not bump the telescopic pole.
In the case of big loads we recommend you to:
A. Install a ladder close to the telescopic pole.
B. With one hand, press the joystick command and accompany the load ascent with the other hand.
After the manual use of the lift by the handle, make sure you replace it correctly
USING THE HOISTER – ADDITIONAL REMARKS
FOR APPROPRIATE USE OF EQUIPMENT AND ACCESSORIES
Do not move a load that exceed the tolerance limits of the lift.
Do not use the lift for applications other than those permitted.

SAFETY EQUIPMENT

Use a protective helmet while using the lift.
STRICTLY PROHIBITED
Move or move the lift by pulling the power cord or steel cables.
Be sure to Keep your balance near the lift.
MAINTENANCE AND INSPECTION OF THE LIFT
Follow the instructions in the manual for the lubrication of the telescopic pole.
Regularly check the correct operation of the lift. Upon the occurrence of damage or abnormality, contact your dealer
immediately to arrange for its repair or replacement.
SWITCH OFF AND UNPLUG THE LIFT FROM POWER IN THE FOLLOWING CASES
In case storage or before any repair.
When you are facing a dangerous situation
SUGGESTION OF USE
During use, check the proper functioning of the telescopic pole, the load and the objects in proximity of the pole to
avoid any potential danger.
Maintain a constant concentration level during the operations.
Do not use the lift lightly or in situations of fatigue.
TELESCOPIC POLE CONTROL
During operation, check that all the elements making up the lift function correctly and do not constitute a potential
danger. Do not use the lift if the power switch does not work properly.
9