Dangerous Situation - Tecnosystemi smart clima 11100220 User Manual

GENERAL SAFETY CONDITIONS
Ensure that staff responsible for the use and maintenance of the lift has read and understood these
instructions before beginning any operation.
The personnel using the equipment must be able to operate safely without any risk.
The employees must be provided documentation to:
- The instructions of use.
- The staff should also be trained before performing the first tests.
PRECAUTIONS
Do not use the device for lifting individuals.
Do not climb on the platform.
ATTENTION!
Do not stand under the platform during use: risk of death resulting from the fall of weights lifted or during
each lifting operation.
Maintain a safe distance between the lift and the electrical system.
As long as the current is not interrupted, the user should not touch the pole.
Do not cross the steel cables.
Do not move the pole during lifting operations.
Do not use the lift on movable surfaces and / or unstable.
Do not place ladders on the platform.
PRECAUTIONS IN CASE OF DEFECTIVE MATERIAL
Do not use the lift if it is damaged or defective.
Do not use the lift if the cables are used, frayed, kinked or damaged.
In the presence of abnormalities, immediately stop using the lift.

DANGEROUS SITUATION

If the tripod is not correctly positioned or fixed.
If the lifter has not been resting on a flat surface, stable or weak.
In case the load has not been centered on the platform.
In case the central pipe rests not perfectly ground and if the surface is not sufficiently flat and solid.
Failure to adhere to the tolerances of overload (you can at any time check the possible
overloaded the structure).
SECURITY PERIMETER
Keep away from children or unauthorized persons from the central pole of the lift.
Do not allow other people to maneuver or manipulate the lift without adequate training.
EXECUTION SPEED
Adjust the rate of ascent and descent according to the loaded weight.
DEPOSIT
After use, store the hoist in a dry place, keep out of reach of children.
7