System Settings - Bosch F.01U.299.030 Operation Manual

46 en | Configuration
7.4.6

System settings

Preconditions:
–
Click the System settings button on the homepage to open the system settings page.
Figure 7.6: CCSD‑CURD system settings
Users
Click the Users button on the system settings page to open the user settings page:
This page is used to enter and modify user information and rights.
–
–
–
–
–
For each (new) user, the following can be entered or selected:
–
–
2020.05 | V2.2 |
To access System settings and change parameters, the logged on user must have the
access right: Configure and/or Modify users.
To add a user, click the + button to open the 'add new user' screen.
To change a user's name, select the user (the dark grey color means selected), and then
use the panel on the opposite side of the page to make changes.
To change a user's password, select the user, and then click the 'change password'
button.
To change a user's rights, select the user, and then click the required 'user rights' button.
To remove a user, select the user, and then click the recycle bin.
General: Enter First name, Last name, Username, Password (may be empty).
User rights: select the required user right (grey means selected):
– Manage meeting: This right gives access to the manage discussion and manage
recorder pages, and volume control. Refer to Manage discussion, page 43 or Manage
recorder, page 45 .
– Prepare meeting: This right gives access to the prepare discussion pages. Refer to
Prepare discussion, page 44 .
– Modify users: This right gives access to the users page.
– Configure: This right gives access to the system settings page (excluding the users
page, unless the user has the right 'modify users'), the system info and logging
pages, and volume control.
Operation manual
Digital Discussion System
Bosch Security B.V.