Bosch F.01U.299.030 Operation Manual page 41

Digital Discussion System
Homepage buttons:
Button
Manage
discussion
Prepare
discussion
Manage
recorder
(CCSD‑CURD
only)
System settings
Power
Logging
System info
Logout
Bosch Security B.V.
Description
To manage a discussion. See Manage discussion,
page 43 .
To prepare a discussion. See Prepare discussion,
page 44 .
To manage the recorder. See Manage recorder,
page 45 .
To configure the system. See System settings,
page 46 .
On: Activates the Control Unit. After a few
seconds, the system is ready for use.
Standby: Sets the Control Unit to 'standby' and
switches off the devices:
– All LEDs on the Discussion Devices go out.
– To indicate that the Control Unit is in
'standby', the green power on LED on the
front panel is lit, and the Discussion Devices
volume control LED flashes slowly. All other
LEDs are off.
– The 'waiting list' and 'speakers list' are
cleared.
– Recording is stopped, if active.
Cancel: Closes the 'power' pop‑up window.
Overview and saving of system events. See
Logging, page 52 .
Overview of MAC and IP addresses and software
versions of the Control Unit and web browser
interface application. See System info, page 52 .
Exits the discussion application and returns you to
the login page. See Logout, page 52 .
Operation manual
Configuration | en 41
Access right
Manage meeting
Prepare meeting
Manage meeting
Configure or Modify
users
Prepare system
Configure
Configure
None
2020.05 | V2.2 |