Table of Contents
Advertisement
Technical Information
4
Service
4.1
Programming Mode Summary
Initial requirements:
1. End the current program as well as the demo mode.
2. Open the door.
Accessing:
Note: Access has to be completed within 10 seconds.
1. Press and hold the Start/Stop button.
2. Close the door.
3. As soon as the "Start/Stop" LED flashes, release the Start/Stop button.
4. Immediately press Start/Stop 5 times and on the 5th time hold it until the
"Start/Stop" LED flashes rapidly (5 flashes per second).
Acknowledgement indicator:
"Start/Stop" LED flashes rapidly (5 flashes per second).
If access is not successful, the machine will automatically revert to standard
operating mode.
Options:
1. Press the Buzzer button to select a programming function.
2. The "Buzzer" LED flashes to indicate the selected function. See Table 090-4.
3. Press the Start/Stop button to select options.
4. The "Drying" LED flashes to indicate the selected option. See Table 090-4.
Warning!
For the dryer to function properly, specific options for the country it is
operating in have to be selected.
The appropriate electronic must be installed.
Factory settings are indicated in bold.
60
T 9800/T 982x
Advertisement
Table of Contents
