Table of Contents
Advertisement
Safety Information for Installation and
Operation
Installation Requirements
•
RF Safety Distance
•
Cable Connections
•
•
Power Supply Information
•
Restricted Environments
•
Radio Approvals
•
Radio or Television Interference
•
Wireless Interoperability
NOTE:
Additional regulatory notifications and information for this product can be found online at:
https://www.sonicwall.com/support/technical-documentation
SonicWave 224w complies with FCC U-NII New Rules.
Regulatory Model/Type
APL45-0D0
Installation Requirements
WARNING:
The following conditions are required for proper installation:
1
Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of
104º F (40º C) is recommended.
2
Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios,
transmitters, and broadband amplifiers.
3
Ensure that no water or excessive moisture can enter the unit.
4
Allow unrestricted airflow around the unit. A minimum of 1 inch (25.44mm) clearance is recommended.
5
Consideration must be given to the connection of the equipment to the supply circuit and that the effect
of overloading the circuits has minimal impact on overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings must be used when addressing this concern.
6
This equipment is not intended for use at workplaces with visual display units, in accordance with §2 of
the German ordinance for workplaces with visual display units. To avoid incommoding reflections at visual
display workplaces, this device must not be placed in the direct field of view.
Product Name
SonicWave 224w
SonicWall SonicWave 224w
Safety and Regulatory Information
4
Advertisement
Table of Contents
