Operating Your Appliance; Location And Use Of Controls - Travis Industries AVALON 1196 Owner's Manual

OPERATING YOUR APPLIANCE

Location and Use of Controls

Combustion Air Control
The Combustion Air Control is located in the center under the ashlip and is operated by pushing or pulling
the control. When the control is completely pushed in, it is in the fully open position. When it is completely
pulled out, it is in the fully closed position.
Bypass Damper Control
The bypass Damper Control is located on the center top of the appliance, and is operated also by pushing
or pulling the control. When pulled out all the way, it is in the fully open position. When pushed in all the
way, it is in the fully closed position.
NOTE: The Bypass Damper Control becomes very hot during operation and should only
be controlled with the operating tool provided.
Bypass Damper Control
Combustion Air Control
Page 41