Connectivity; Register - Mitel IP8630M Operation Manual

6.4 Connectivity

The "Connectivity" menu is entered in the menu by pressing the menu activity key in idle.
In this menu it is possible to register or deregister the handset to a certain base system. Moreover, the
"Select network" function makes it possible to register the handset to more than one base system.

6.4.1 Register

When a handset is to be registered on a base system, the user will be prompted for an access code
(base registration PIN) before the registration procedure is started. Since it is possible for the handset
to be registered on different base systems that are out of range of each other, the "Register" menu
displays 10 different entries with which the handset can be assigned to different base systems. When
selecting an "Empty" entry the user is prompted for the PIN code as shown below.
The access PIN code is default "0000" and cannot be changed via the handset. The access PIN code can
only be changed via the web interface on the base (please check the additional document via [2] for
more information about handset registration on a base system).
It is also possible to overwrite an existing registration by selecting that entry that should be
overwritten instead of selecting an "Empty" slot. This is displayed below.
Version 1.4 Page | 29