Standard Bracket Two-Post Installation - Dell PowerSwitch N3200-ON Series Installation Manual

3. Slide the switch into the wall-mount tray.
4. Line up the two mushroom-head hooks on the switch to the tray hook cutouts until the switch locks into place.
5. Fix the switch to the tray using two screws on each side.
6. Snap the two DIN buckles into the DIN rails.
To uninstall the switch, unscrew the four mounting tray screws and slide the switch from the mushroom head hooks.

Standard bracket two-post installation

This switch installation procedure is for the compact N3208PX-ON switch only. Use these brackets for front- or center-mount
installation.
NOTE: Do not use this installation procedure for the full-width N3200-ON/E3200-ON Series switches.
You must order the mounting supplies for this installation separately.
For a front-mount installation, align the standard bracket rackmount ends with the I/O-side of the switch. For a center-mount
installation, align the standard bracket rackmount ends away from the I/O-side of the switch.
1. Remove the two standard brackets and screws from the shipping box.
2. Insert the standard bracket onto the mushroom head on each side of the switch and slide the bracket back to lock it into
place.
N3200-ON/E3200-ON Series switch installation 31