Dell PowerSwitch N3200-ON Series Installation Manual page 64

Hide thumbs Also See for PowerSwitch N3200-ON Series:

Table of Contents

NOTE:

If you are connecting a single EPS power cable to your switch, always use primary A-slot. Leave the secondary

B-slot DC power cover in place, as shown:

2. Unscrew the DC-power-OUT cover from the rear of the EPS shelf.

NOTE:

If you are connecting a single EPS power cable to your MPS-3S shelf, always use primary A-slot. Leave the

secondary B-slot DC power cover in place.

MPS-1S shelf

MPS-3S shelf

Power supply

Table of Contents

Powerswitch e3200-on series