Dell PowerSwitch N3200-ON Series Installation Manual page 21

Table 10. Reset button behavior
Reset button
Press for 4 s-> stop-> 8 s.
Press for 8 s-> stop->12 s.
Press for 12 s-> stop.
Description
Cold reset is performed.
A flag is set in the CPLD register for
this partial clean request. The operating
system performs a partial clean of
settings, and sets a reset bit for the
CPLD to perform a cold reboot.
A flag is set in CPLD register for this
complete clean request. The operating
system performs a complete reset of any
user configured parameters and sets a
reset bit for the CPLD to perform a cold
reboot.
LED status
Blinking green at the rate of 256
milliseconds
Solid amber
Solid green
N3200-ON/E3200-ON Series switch 21