Brother DCP-J572DW Online User's Manual page 588

Level 1 Level 2
WLAN TCP/IP
Setup Wizard
WLAN Assistant -
WPS
WPS w/ PIN
Code
WLAN Status
MAC Address
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device
Information
Status
Information
I/F Enable
NFC -
(MFC-J890DW/
MFC-J895DW)
Message from Message from
Brother Brother
Status
Web Connect Proxy Settings Proxy
Settings
Level 3 Level 4 Descriptions
IPv6 -
- -
-
- -
- -
Status
-
Signal -
SSID -
Comm. Mode -
- -
- -
- -
- -
- -
Device Name -
SSID -
IP Address -
Status -
Signal -
- -
- -
- -
- -
-
Connection
Address -
Turn the IPv6 protocol on or off. For
more information, go to the Brother
Solutions Center at support.brother.com
to see FAQs & Troubleshooting.
Configure your wireless network settings
manually.
Configure your wireless network settings
using the Brother installation disc.
Configure your wireless network settings
using the one-button push method.
Configure your wireless network settings
using WPS with a PIN.
View the current wireless network
status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication mode.
View the machine's MAC address.
Configure your Wi-Fi Direct network
settings using the one-button push
method.
Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
Configure your Wi-Fi Direct network
settings manually.
Set your machine as the Group Owner.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network
status.
View the current Wi-Fi Direct network
signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
Turn the Wi-Fi Direct connection on or
off.
Turn the NFC function on or off.
Display messages and notifications from
Brother.
Change the Web connection settings.
581