Brother DCP-J572DW Online User's Manual page 15

• Press to look up and dial numbers that are stored in the machine's memory.
Press to configure the wireless settings while the machine is idle.
a or b
Press to scroll through the menus and options.
d or c
• Press to move the cursor left or right on the LCD.
• Press to either confirm or cancel a procedure which is in progress.
4. Telephone buttons
Tel/R
If the machine is in Fax/Tel (F/T) mode and you pick up the handset of an external telephone during the
F/T ring (pseudo/double-ring), press Tel/R to talk.
When connected to a PBX, press to gain access to an outside line or to transfer a call to another
extension.
Redial/Pause
• Press to redial the last number you called.
• Press to select and redial the numbers from the Outgoing Call history or Caller ID history.
• Press to insert a pause when dialling numbers.
5. Dial Pad
• Use to dial fax and telephone numbers.
• Use as a keyboard to enter text or characters.
6. Stop/Exit
• Press to stop an operation.
• Press to exit from a menu.
7. Start buttons
Mono Start
• Press to start sending faxes in monochrome.
• Press to start making copies in monochrome.
• Press to start scanning documents (in colour or monochrome, depending on the scan setting).
Colour Start
• Press to start sending faxes in full colour.
• Press to start making copies in full colour.
• Press to start scanning documents (in colour or monochrome, depending on the scan setting).
8. Power On/Off
Press to turn the machine on.
Press and hold down
few seconds before turning itself off. If you have connected an external telephone or TAD, it is always
available.
If you turn the machine off using
prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected
to a power source at all times.
to turn the machine off. The LCD displays [Shutting Down] and stays on for a
, it will still clean the print head periodically to maintain print quality. To
8