Table of Contents
Advertisement
Available languages
Available languages
3. Remove the belt cover from the floor
nozzle.
4. Lift the lower plate combined with the
brushroll.
Belt
BELT CHANGING
Belt Cover
I
Motor Shaft
Lower Plate
with Brushroll
CAUTION
Motor shaft may be hot.
WARNING
There are sharp edges inside to prevent
hair entanglement. Do not put any part
of the body into the floor brush during
maintenance.
5. Remove the worn or broken belt.
6. Clean any debris from the floor nozzle.
7. Loop the new belt around the motor
shaft and the belt path on the brushroll.
NOTE:
Before reinstalling the lower
plate, make sure the belt is in the middle
of the belt path as shown.
- 21 -
II
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the FeatherLite DU1275 and is the answer not in the manual?
Questions and answers
Filters: What is the foam and felt material actual made of? And why can I not find them online from Kenmore directly? Seller on Amazon wants $12-15 for ONE EACH!?
The foam and felt filters for the Kenmore FeatherLite DU1275 are made of foam and felt materials. The document does not state why they are not available for purchase directly from Kenmore.
This answer is automatically generated
How do the attachments connect?