Kenmore FeatherLite DU1275 Use & Care Manual page 19

The pre-filter is located inside the dust cup.
Clean the pre-filter as needed to optimize
suction power.
1. Remove the dust cup as outlined in
EMPTYING DUST CUP (page 18).
NOTE:
Make sure dust cup is free of
debris before opening.
2. Press the dust cup lid release button, and
open the lid.
Dust Cup Lid
Release Button
It is recommended to clean the foam and
felt filters with cold water every three
months.
NOTE:
When the cleaning of filters no
longer restores vacuum cleaner suction
to full power, or the filters are worn or
broken, replace the filters. To purchase
filters, call 1-877-531-7321 (US) / 1-844-
608-3081 (CA).
Regularly clean and replace the filters to
keep the vacuum's suction power optimal.
1. Remove the dust cup as outlined in
EMPTYING DUST CUP (page 18).
2. Remove the foam and felt filters.
PRE-FILTER CLEANING
FOAM AND FELT FILTERS CLEANING
3. Clean pre-filter by gently tapping over a
trash container. Tap on several sides to
ensure best cleaning.
Pre-fitler
4. Reinstall the dust cup into the main
body. See installation instructions in
EMPTYING DUST CUP (page 18).
Foam Filter
Felt Filter
- 19 -