Table of Contents
Advertisement
Available languages
Available languages
WARNING
Always unplug power cord from
electrical outlet before performing any
service on vacuum cleaner.
NOTE:
For best performance, empty
dust cup after every use. Never operate
vacuum cleaner without dust cup and
filters in place.
1. Press the dust cup release button to
remove the dust cup from the main body.
Dust Cup
Release
Button
II
Dust Cup
2. Remove any clogs that might be located
in the suction port.
EMPTYING DUST CUP
I
Suction
Port
- 18 -
3. Position dust cup area of vacuum over
a waste receptacle. Press down on the
dust release button to open dust cup lid
and allow contents to drop into waste
receptacle.
4. Shake the dust cup to release any debris
that might hang in the pre-filter.
5. Reinstall and insert the dust cup into the
slots on the bottom of the main body,
then press the dust cup back into the
locked slot until you hear it click into
place.
II
I
Dust
Release
Button
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the FeatherLite DU1275 and is the answer not in the manual?
Questions and answers
Filters: What is the foam and felt material actual made of? And why can I not find them online from Kenmore directly? Seller on Amazon wants $12-15 for ONE EACH!?
The foam and felt filters for the Kenmore FeatherLite DU1275 are made of foam and felt materials. The document does not state why they are not available for purchase directly from Kenmore.
This answer is automatically generated
How do the attachments connect?