Table of Contents
Advertisement
In order to install the EcoKnight™ water heater with a type C (room sealed) flue system a flue transition kit must first
be installed, this kit is used for both C
describes these flue transition kits and there installation
10.8
INSTALLATION OF FLUE TRANSITION KIT TO EKW46CE – EKW61CE WATER HEATERS
10.8.1
FIGURE 9.2
Depending upon the flue kit chosen either a vertical or horizontal concentric terminal will be
included in the packaging with the transition kit, additional elbows, flue lengths etc. Are
available as ancillary items. Additional wall brackets may be required to ensure the flue system
is stable.
For a full list of flue components supplied and optional parts to complete the system see the
EcoKnight™ flue guide available at
ITEM NUMBER
1
2
3
4
5
10.8.1
FLUE TRANSITION PARTS EKW46CE – EKW61CE
(horizontal) and C
13
FLUE TRANSITION PARTS EKW46CE – EKW61CE
www.Lochinvar.ltd.uk
DESCRIPTION
90⁰ ELBOW
SAMPLING POINT
CONCENTRIC ADAPTOR
AIR INTAKE TRANSITION
80mm X 500mm LENGTH
(vertical) flue systems. The information in this paragraph
33
EKW 46CE
3 REQUIRED
1 REQUIRED
1 REQUIRED
1 REQUIRED
CUT TO 270mm
EKW 61CE
3 REQUIRED
1 REQUIRED
1 REQUIRED
1 REQUIRED
CUT TO 270mm
24
Advertisement
Table of Contents
