Toyota Venza 2011 Manual page 71

■
Adjusting the rear center seat head restraint
Always raise the head restraint one level from the stowed position when
using.
■
Removing the head restraints
■
Installing the head restraints
CAUTION
■
Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
●
Use the head restraints designed for each respective seat.
●
Adjust the head restraints to the correct position at all times.
●
After adjusting the head restraints, push down on them and make sure
they are locked in position.
●
Do not drive with the head restraints removed.
VENZA_U (OM73012U)
1-3. Adjustable components (seats, mirrors, steering wheel)
Pull the head restraint up while pressing
the lock release button.
Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
1
71