Toyota Venza 2011 Manual page 459

STEP 3
STEP 4
Repeat the steps above to program another device for each of
the remaining HomeLink
VENZA_U (OM73012U)
3-8. Other interior features
Test the HomeLink
by pressing the newly pro-
grammed button.
If a HomeLink
programmed for a garage door,
check to see if the garage door
opens and closes. If the garage
door does not operate, see if your
remote control transmitter is of
the rolling code type. Press and
hold the programmed HomeLink
button. The remote control trans-
mitter is of the rolling code type if
the HomeLink
flashes rapidly for 2 seconds and
then remains lit. If your transmit-
ter is of the rolling code type, pro-
ceed to
"Programming a rolling code sys-
tem".

buttons.

operation

button has been


indicator light
the heading
459
3