Hendi 221884 Manual page 9

Operating instructions (Model: 222140)
CAUTION: Before connecting the appliance to the power supply, check that the power supply voltage corre-
sponds with the power supply details shown on the rating label.
REMARK: There is no lock function for continuous operation for this model 222140.
Operating the appliance:
1. Ensure that the appliance is disconnected from
the power supply before assembly.
2. Connect the blending shaft/whisk to the main
unit.
3. Check that the ON/OFF button (1) is in the
released (flat) position.
4. Connect the appliance to the power supply.
5. Then, press the ON/OFF button (1). The appliance
will turn on. BE CAREFUL!
6. To turn off the appliance, release the ON/OFF
button (1).
Operating instructions (Model: 221884, 221891, 222393)
CAUTION: Before connecting the appliance to the power supply, check that the power supply voltage corre-
sponds with the power supply details shown on the rating label.
REMARK: There is lock function for continuous operation for the model 221884 & 221891.
Starting and stopping the appliance
1. Ensure that the appliance is disconnected from
the power supply before assembled.
2. Connect the blending shaft/whisk to the main
unit.
3. Check that the ON/OFF button (3) is in the
released (flat) position.
4. Connect the appliance to the power supply.
5. Press and hold the Safety button (1) first.
6. Then, press the ON/OFF button (3) at the same
time. The appliance will start up. BE CAREFUL!
7. Release the Safety button (1), the appliance will
keep operating.
8. To stop the appliance, release the ON/OFF
button (3).
Continuous operating the appliance:
Follow steps 1 to 7 above, then:
• With the ON/OFF button (3) in "pressed" position,
press Locking button (4) once.
• Release the ON/OFF button (3) and the appliance
will keep operating in a continuous mode.
• To turn off the appliance, press and release the
ON/OFF button (3).
2
1
EN
9