Fuel System Maintenance; Replacing The Fuel Filter; Electrical System Maintenance; Electrical System Safety - Toro 75210 Operator's Manual

Fuel System
Maintenance

Replacing the Fuel Filter

Service Interval: Every 100 hours/Yearly (whichever
comes first) (more often under
dusty, dirty conditions).
1. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and set the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Replace the fuel filter
A
B
C
D
g027518
Figure 43
-L
EUTRAL OCK
(Figure 43).
g027590
g027590
g027518
Electrical System
Maintenance

Electrical System Safety

•
Disconnect the battery before repairing the
machine. Disconnect the negative terminal first
and the positive last. Connect the positive terminal
first and the negative last.
•
Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug the
charger before connecting or disconnecting the
battery. Wear protective clothing and use insulated
tools.
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm. Wash
hands after handling.

Servicing the Battery

Removing the Battery
WARNING
Battery terminals or metal tools could short
against metal machine components causing
sparks. Sparks can cause the battery gasses
to explode, resulting in personal injury.
• When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
1. Park the machine on a level surface and
disengage the blade-control switch.
2. Ensure that the parking brake is engaged,
shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Loosen the 2 fasteners on the battery cover
counterclockwise 1/4 turn, and remove the
battery cover (Figure
37
WARNING
44).