PROAIM BP-302-01 Assembly Manual

Mitchell base to bowl camera adapter 150mm

Mitchell Base to Bowl Camera Adapter

150mm

(BP-302-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Washer

Allen Key 3/16"

2 x Bolts

Proaim Mitchell Base to Bowl

Camera Adapter 150mm

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the BP-302-01 and is the answer not in the manual?

Page 1 Washer Allen Key 3/16” 2 x Bolts Proaim Mitchell Base to Bowl Camera Adapter 150mm All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Page 2 Bowl Camera Adapter 150mm Setup • Mount the 150mm Bowl Adapter on the Slider (Not Included). Note: The Mitchell Base to 150mm Bowl Adapter provides multiple mounting possibilities owing to its innovative design. • Loosen and remove the fluid head knob as shown in the image.
Page 3 Included). • The Setup is ready to use. YOUR PROAIM MITCHELL BASE TO BOWL CAMERA ADAPTER 150MM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.