Disposal - Linde HiQ R200 Instructions For Use Manual

WARNING!
•
Do not open system filled or used with toxic and/ or corrosive gases.

10.3. DISPOSAL

In the absence of a return or disposal agreement, the dismantled components should be recycled as follows:
Metals: scrap.
Plastics: recycle.
Other components: sort and dispose.
In accordance to Article 33 of REACH GCE, s.r.o. as responsible manufacturer shall inform all customers
if materials containing 0.1% or more of substances included in the list of Substance of Very High Concern
(SVHC).
The most commonly used brass alloys used for bodies and other brass components contain 2-3% of lead (Pb),
EC no. 231-468-6, CAS no. 7439-92-1. The lead will not be released to the gas or surrounding environment
during normal use. After end of life the product shall be scrapped by an authorized metal recycler to ensure
efficient material handling with minimal impact to environment and health.
To date we have no information that indicates that other materials containing SVHC of concentrations
exceeding 0.1% are included in any GCE product.
NOTE!
•
Risk of environmental harm through incorrect disposal!
•
Incorrect disposal can harm the environment.
•
Commission a specialized licensed firm to dispose of electrical waste, electronic components, lubricants
and other auxiliary materials.
•
If in doubt, enquire how to ensure environmentally compatible disposal at your local council office or
consult a specialist disposal firm.
www.linde.com
These products were manufactured on behalf of Linde GmbH.
21/44
EN