Table of Contents
Advertisement
A 4500C/A 4505C Software Programming Guide
If the connection is successful, then the programming screen should look like that shown in figure 7.3 with the green
"Timer Enabled" box visible. The connection address and time of connection are shown in the top right corner, and new
options are now listed on the top left.
If the connection is not successful there could be a number of reasons which are covered in section 11.0.
8.0 DOWNLOAD EVENT PROGRAM FROM THE TIMER
In order to make changes to the event program stored in the timer, the configuration file will need to be downloaded from
the timer. Navigate to and select the "Download Config" tab at the top of the programming window.
A prompt window will appear to confirm the download as shown in figure 8.1. After downloading the file, the timing
events will be displayed and can then be edited
The file can be saved to the PC at any time, using the Save or Save As functions if a copy is required. If changes are re-
quired to the audio output folders refer to the Manage Files section 9.0 or if the program is to be uploaded back to the
timer use the Upload Config option outlined in section 10.0.
12
Redback® Proudly Made In Australia
Fig 7.3
in exactly the same manner as outlined in section 2.0.
Fig 8.1
www.redbackaudio.com.au
Advertisement
Table of Contents
