Beko BEVPCC 090 User Manual page 27

5 Remote controller
3. Fan speed button
For selecting indoor fan speed
Auto
High
4. Timer selection button
Press this button to select timer.
5. Airflow sweep button
For changing vertical blades position and
swing or not.
6. LED button
To start or stop LED when air conditioner is in
RUNNING.
7. GoClean button
Press this button to turn on self-cleaning
technology
Note:
1. HEAT, AUTO function and display are not available for cooling-only type air
conditioner.
2. If user want to make the room air cool or warm quickly, user can press "turbo" button
in cooling or heating mode, air conditioner will run in power function. If press "turbo"
button again, air conditioner will exit power function.
3. When "AUTO" mode is set, air conditioner will adapt to HEAT, COOL mode according
to the D-value between indoor temperature and set temperature.
C
4. When "AUTO" mode is set, Sleep function is not available.
5. When "DRY" mode is set, in accordance with the D-value between indoor
temperature and set temperature. Air conditioner will start or stop the cooling
operation and fan speed automatically to decrease room humidity. Fan speed can' t
be controlled sometimes.
6. When FAN mode is set, temperature can' t be adjusted. Only high, medium and low
fan speed can be set; no Auto fan speed.
7. The above illustration of remote controller is only for reference; it may be slightly
different from the actual product you selected.
Air-conditioners / User's Manual
Medium
Low
8. Quiet button
Set the air conditioner operating in low noise.
9. Temp adjustment buttons
Press "" to decrease temp. Press " " to
increase temp.
10. On/Off button
Press this button to start / stop air
conditioner.
11. Mode selection button
For selecting
AUTO
COOL
FAN
12. Display Screen
For setting display
HEAT
DRY
27 / EN