Flavel Kenilworth Installation, Maintenance & User Instructions page 37

3.12 TO FIT THE FENDER (RHAPSODY & CARESS CONTEMORARY
MODELS)
3.12.1 Attach L/H & R/H Brackets to fender with M6 pozi screws which locate
onto the burner heat shield at in front of the burner assembly.
See figure 34, 35 & 36 below and overpage.
Fig. 34
Locate fender
brackets onto burner
heat shield as shown
in figure 36
Fig. 35
Burner heat shield.
Engage fender
brackets shown in
figure 35 onto burner
heat shield to retain
fret.
Fig. 36
Correct final position
of fender
36