Printronix SL4M Quick Setup Manual page 8

Loading Ribbon And Roll Media
Ribbon Take-Up
Core
Printhead
Platen
(not shown)
5. Thread the end of the ribbon under the ribbon guide rollers,
between the platen (rubber drive roller) and the printhead, and
between the ribbon take-up and supply spindles.
NOTE: Make sure to thread the ribbon behind the ribbon take-up
NOTE: The alternate ribbon path is for ribbons that are inked on
8
spindle.
the inside.
Ribbon
Take-Up Spindle
Ribbon
Supply Spindle
Alternate
Ribbon Path
Ribbon
Ribbon Guide
Roller (2)